Home > Knowledge > Content
Product Categories

Suspended Platform Gondola Load Cell Indicator

Basic Info
  • Model NO.: IN318B

  • Transform Type: Electromagnetic Force

  • Output Signal Type: Digital Type

  • Production Process: Normal Wirewound

  • IP Rating: IP65

  • Customized: Non-Customized

  • Rated Load: 1-6t

  • Sensor Overload Capacity: 150%

  • Sensor Working Voltage: DC5-12V

  • Sensitivityof The Sensor: 1.0000mv/V

  • Sensorprotection Level: IP65

  • Transport Package: Standard Export Packing

  • Origin: China

  • Pattern: Column Cylinder Type

  • Out-Wire: 4-Wire

  • Feature: Low Temperature Resistant

  • Material: Metal

  • Certification: CE

  • Rated Power: 5W

  • Display Mode: 4-Digit Nixie Tube Display

  • Working Voltage: AC180-260V

  • Working Temperature: -20-60 Degree

  • Operating Humidity: 95%

  • Specification: 3kg

  • HS Code: 537109090

Product introduction:
This overloading alerter constitutes a resistance strain weighing sensor and an intelligent control instrument. As a safeguarding appliance for the Construction lifter,it is designed to provide sound, light and electric alarm during loading operation of the elevator. Meanwhile, it saves the operation data so that the operation situation of the elevator can be traced and analyzed in case of accident. Our company concentrates on the development, production and sales of load lifting limiter, and we are striving to become the model of this industry.
1 Control channel:Single channel is only for the measurement and relay control of one-way equipment.
2 Measurement accuracy: high accuracy ADC, the measurement accuracy of the controller is over 1%, and is better than traditional analog signal instrument.
3 System error:≤1%F.S
4 Display: four-digit nixie tube: 00.00-99.99
and English characters display, also works as weighing instrument.
5 Weight display: display actual lifted weight; the industrial resolution radio is 1kg; weighing instrument of other industry is applicable.
6 Cut off or switch on circuit by normally-closed contact (normally open optional) of single-channel relay; external buzzer can be connected (optional).
7 Key:four keys:set ↑ ↓ → 0.
8 Calibration:No-load zero, 5% ~ 100%F.S range of any calibration. Calibration parameters are stored into the microcontroller block high reliable EEPROM. Recommended weight of the weights is 50 ~ 100% of the rated weight. The heavier the weights, the higher the precision. At least not less than 10% of the rated weight to ensure accurate alarm point.
Services & Products
Home
About Us
Product
News
Knowledge
Contact Us
Tel: +86-23-68880536
Mob: +8615909399991
Add: B Area, Jiulongpo Industry Park,
Jiulongpo Distric of Chongqing, China
Email: sales01@hoist-cranes.com
Feedback