LD-Single Girder Overhead Crane Under Running Crane (LD) The LD type of under running overhead crane (also called bridge crane )is the most popular designing since the very beginning. Our annual turnout is 20,000 units for the whole market. The main girder adopts 6mm and 8mm thickness steel plate.
Chinese workshop has a 1700mm clearrance above the rail, which is excellenct for the maintenance of the crane. In some Middle East countries, the clearance is less than this, and please indicate this data when you placing the order. Steel Plate Cutting and Treatment The board was cut by auto-cutting machine.
Main Beam We reserve the concept of "safety factor", and remain the traditional main beam fabrication methord. Each of the beam is made by 6mm thickness of side board, and 8mm top and bellow board. Bearing System The reducer is hardtooth designing. Bearing is HA/WA/LUO 3 brands. Casting box type.
The gear box is made by our factory in order to give a reliable quality. The market has many suppliers, and some of them can get 50% price than ours. However, we do not reduce the quality in order to reduce the cost. Safety Device Long travel limit switch Cross travel limit switch Counter-weight and pedal limit switch for hoisting Pedal limit switch for lowing Overload limit switch End Trucks (Carriage) Soft start driving system(380v only) makes the long travel smoothly, reduces noise.
Modular system designing gives the crane more free working space. Unique conbinations with steel profiles sections for maximum distance between suspensions. Double C-track Festoon System 4mm thickness national standard trackpull and push wheel with sealed bearing Flat cable for strong life. Electrical box has indication of working. This double C-track festoon system makes the driver can be seperate from the hoist , so that give a maximum safety protection.